12V Nicad Battery charger 200mA/H

12 V Nicad Battery charger1 300x170 12V Nicad Battery charger 200mA/H

This 12V Nicad Battery charger 200mA/H circuit charges the electric battery at 75 mA until the battery is charged, then it cuts down the current to a trickle rate. It’ll fully recharge a dead nicad battery in 4 hours and the battery can be left in the  Nicad Battery charger for a long time.

Setting the shut-off point, connect a 270 ohm, 2-W resistor across the charge terminals and adjust the pot for 15.5 V across the resistor.

Parts list :
R1 : 1K
R2 : 68ohm
R3 : 2K
D1, D3 : 1N752
D2 : 1N4001
T1 : 2N2219
T2 : 2N2222
VR1 : 10K

  Title :   12V Nicad Battery charger 200mA/H
  Category :   Battery Charger.
  Tags :   12 V Nicad Battery charger,  12 V Nicad charger,  Nicad Battery charger,  Nicad Battery charger circuit, 

Post Related to 12V Nicad Battery charger 200mA/H:



Comments

2 Responses to “12V Nicad Battery charger 200mA/H”
  1. Jerry Seerungum says:
    October 19, 2011 at 10:20 am

    hi….what changes do i have to make to produce a current of 100mA instead of 75 mA….and how did you came up with those resistors values?what calculations do i need to do to get that?

    Reply

Do you have any comments on 12V Nicad Battery charger 200mA/H ?

Search to this 12V Nicad Battery charger 200mA/H post: NiCd Battery Charger, 12v nicd charger circuit, design charger with 200mA