6.8 Volt Transformerless Power Supply.

Quite a simple power supply unit can be built for half an hour.
6.8V Transformerless Power Supply 300x100 6.8 Volt Transformerless Power Supply.
The scheme is designed for voltage and current of 6.8 V 300mA. The voltage can be changed by replacing the Zener D4 and, if necessary, D3. A setting on the radiators of transistors can be increased and the load current.
Diode bridge – any, is nice and a reverse voltage of at least 400 volts. By the way, we can recall the ancient and diode D226B, once terribly popular.

WARNING!
Scheme is not galvanically isolated from the AC, so when its assembly, setup and use, you must be extremely cautious.

Parts list :
R1 : 4K7
R2 : 5K6
R3 : 3K9
C1 : 1000uF/10V
D1 : KU405B
D2 : KC650A
D3 : D817B
D4 : KC168
T1 : KT940A
T2, T3 : KT815

  Title :   6.8 Volt Transformerless Power Supply.
  Category :   Regulated Power Supply.
  Tags :   6.8 V power supply,  Transformerless power supply, 

Post Related to 6.8 Volt Transformerless Power Supply.:



Comments

One Response to “6.8 Volt Transformerless Power Supply.”
  1. Farrukh Naeem says:
    October 17, 2012 at 5:56 pm

    can yo please give the substitue or repacement part number of the following or the data sheets for the same:
    D1 : KU405B
    D2 : KC650A
    D3 : D817B
    D4 : KC168
    T1 : KT940A
    T2, T3 : KT815

    Reply

Do you have any comments on 6.8 Volt Transformerless Power Supply. ?

Search to this 6.8 Volt Transformerless Power Supply. post: KT940A, transformerless power supply schematic, transformerless power supply high current, 220v to 5v transformerless, transformerless power supply using transistor