Simple Split Rail Power Supply based LM380

split power supply 300x175 Simple Split Rail Power Supply based LM380

This split power supply circuit uses the of the popular LM380 audio power amplifier chip. The device is internally biased so that without having any input the output is held midway between the supply rails. R1, that will be initially set to mid-travel, is used to nullify any inbalance in the output.

Regulation of Vout depends upon the circuit feeding the LM380, but negative and positive outputs will track accurately irrespective of input regulation and unbalanced loads. The free air dissipation slightly more than 1 watt, and so will require extra cooling. The device is fully protected and will shut-down if its rated dissipation is exceeded. Current limiting occurs when the output current is higher than 1.3 A. The split power supply input voltage should never exceed 20 V.

pinit fg en rect gray 20 Simple Split Rail Power Supply based LM380

  Title :   Simple Split Rail Power Supply based LM380
  Category :   Others Power supply Circuit.
  Tags :   LM380,  split power supply,  split power supply circuit,  split rail power supply, 


Do you have any comments on Simple Split Rail Power Supply based LM380 ?

Search to this Simple Split Rail Power Supply based LM380 post: split rail power supply, lm380, split power supply circuits websites, dual polarity power supply with lm78xx, lm380 circuits